ROHDE & SCHWARZ ZVL6 CALIBRATION and ROHDE & SCHWARZ ZVL6 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ ZVL6 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our  used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   ROHDE & SCHWARZ ZVL6 (1303.6509.06)   Description / Specification:   Spec Sheet 
ROHDE & SCHWARZ ZVL6 6 GHz Portable Vector Network Analyzer, 50 Ohm

The R&S ZVL6 (1303.6509.06) 6 GHz 50 ohm Vector Network Analyzer is a portable network analyzer in the compact class, and is therefore ideal for use in development, production, and service. It combines the functions of a network analyzer, spectrum analyzer, and power meter in a single box. Specifications. Frequency range: 9 kHz to 6 GHz. Frequency resolution: 1 Hz. Measurement bandwidths: 10 Hz to 500 kHz in 1/2/5 steps. Measurement time (201 measurement points, full two-port-calibrated): < 75 ms. Data transfer (201 measurement points): 1.5 ms (via RSIB over 100 Mbit/s LAN). Dynamic range: > 115 dB, typ. 123 dB (20 MHz to 5 GHz), > 110 dB, typ. 120 dB (5 GHz to 6 GHz). Test port output Power range: –50 dBm to 0 dBm, typ. –60 dBm to +10 dBm. Test port output Power resolution: 0.01 dB. Test port input Attenuation: 0 dB to 30 dB. Test port input Damage CW RF power: +27 dBm. Display: color TFT, 640 × 480 pixels. Options. FSL-B4 (1300.6008.02), OCXO Reference Frequency. FSL-B5 (1300.6108.02), Additional Interfaces. FSL-B6 (1300.5901.02), TV Trigger. FSL-B7 (1300.5601.02), Narrow Resolution Filters. FSL-B8 (1300.5701.02), Gated Sweep. B10 1300.6208.02), GPIB Interface. FSL-B22 (1300.5953.02), RF Preamplifier (3/6 GHz). FSL-B30 (1300.6308.02), DC Power Supply. FSL-B31 (1300.6408.02), NiMH Battery Pack. FSL-K9 (1301.9530.02), Power Sensor Support. ZVL-K1 (1306.0301.02), Spectrum Analysis. ZVL-K3 (1306.0201.02), Time Domain. FSL-K14 (1302.0913.02), Spectrogram Measurements. FSL-K20 (1301.9675.02), Cable TV and TV Measurements. FSL-K7 (1301.9246.02), AM/FM/phaseM Measurement Demodulator. FSL-K8 1301.9398.02), Bluetooth TX Measurements (1.1 and 2.0+EDR). FSL-K30 (1301.9817.02), Application Firmware for Noise Figure and Gain Measurements. FSL-K72 (1302.0620.02), 3GPP FDD BTS Application Firmware. FSL-K91 (1302.0094.02), WLAN IEEE 802.11a/b/g/j Application Firmware. FSL-K93 1302.0736.02), WiMAX™ IEEE 802.16 OFDM/OFDMA Application Firmware.



 

Standard Calibration $605.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ ZVL6. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Clipping
Clipping is the limiting of a signal so that it never exceeds some threshold.

Modulation
Modulation is the coding of information onto the carrier frequency. This includes amplitude, frequency, or phase modulation techniques.

Sensitivity
Sensitivity is the smallest signal that can reliably detected. Sensitivity specifies the strength of the smallest signal at the input that causes the output signal power to be M times the output noise power where M must be specified. M=1 is very popular

Please contact us for your ROHDE & SCHWARZ ZVL6 CALIBRATION and/or ROHDE & SCHWARZ ZVL6 6 GHz Portable Vector Network Analyzer, 50 Ohm REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: